Flight Autoclave Maintenance Guide

Flight Maintenance Instructions Frequency Maintenance Required Daily Clean Door Seal Clean the External Surface Weekly Clean Distilled Water Reservoir Clean Sterilization Chamber Monthly Clean Filter inside Chamber and Tank Every 3/6 Months Replace Door Seal Every Year Replace Silicone Tubing, filters and door Seal Every 2 Years Replace Battery on Main PCB that Controls Timer…

Autoclave Trouble Shooting Guide – Clave 16, Clave 23

Flight Dental Systems  – Autoclave Error Code Guide Contact your authorized Flight Dealer for technical support. Error Phase Description Probable cause Check Solution E01 The steam generator overheated. Temperature sensor disconnected. Check temperature sensor harness connection on PC board. It may be necessary to wait up to 10 minutes for temperature to dissipate, then initiate…

Sterilization and Infection Control Update for Ontario

Sterilization and Infection Control Newsletter Brampton- September 2017 Here are a few points on sterilization and infection control in a Dental Office. More information in links below. Sterilization Indicators: (RCDSO Guidelines Page 27) Mechanical/Physical Indicators – Printer or Recording Devices must be used for each sterilization cycle to ensure proper mechanical and physical properties of…