The Flight Handpiece Maintenance System (HPL-3001) provides the perfect solution for your handpiece lubrication and maintenance to help extend the longevity of your handpieces and to allow it to perform at its best. The fully automatic maintenance system features a low speed E-Type connector and two (2) high speed 4 hole connections for air driven handpieces. The two 4 hole connections can be coupled with a Kavo, NSK, Star, Midwest, Sirona, or any other manufacturers quick coupler for easy connection.
Automatic Handpiece Maintenance System
The Flight Automatic Handpiece Maintenance System brings together the best features available to make your handpiece maintenance procedure as seamless, clean and easy as possible. The one touch control panel makes maintenance, lubrication and cleaning system easy to use. It has 3 programmed cycles for short, long and extra long cycles to satisfy all the requirements for your slow and high speed handpieces. It comes with an easy fill oil reservoir and clear and easy to read oil indicator level on the side of the unit. The standard system comes with 1 slow speed connection and 2 high speed connections.
The system is easy to install and simple to use and is a necessity for every dental or veterinary office.
|Rated Voltage||AC120V +/- 10% 60 Hz|
|Input Voltage||120V: 19VA|
|Air Pressure||0.35-0.6MPa – (50-85psi)|
|Dimensions||W 280mm x D275mm x H 360mm|
W 11” x D10.8” x H 14.2”
|Weight||6.8kg or 15lbs|
- 2 Highspeed Connection – 1 Low speed Connection
- Easy Fill Oil Reservoir
- Clean and mess-free oil sponge
- Compressed Air Input with Easy connection
- Individual programmed Cycles that provides thorough cleaning and lubrication
- Easily detachable door for easy cleaning
S : Short Cycle for High Speed Handpieces (Lubricating and Cleaning Time: 35 seconds)
L : Long Cycle for Low Speed Handpieces (Lubricating and Cleaning Time: 45 seconds)
E : Extra Long Cycle for Speed Reduction Handpieces (Lubricating and Cleaning Time: 50 seconds)